Hellfire Forge – Dual Burner
Introducing our new budget line of swordsmith forges.
Simple and affordable, these are inswool lined forges.
Designed to have the front and rear partially blocked by firebricks
We include a bag of Satanite 3000° refractory to line the shell for longer life
We include two bags of Kastolite/Plibrico to build a flux resistant bottom
5″ x 18″ open ended chamber
Dual 100k BTU burners
0-20 PSI regulator
Stainless reinforced tee
Two bages of Kaolite LI30/Plibrico flux-resistant mortar
One bag of Satanite 3000° refractory mortar
Some assembly required.
1. Install the included leg bolts
2. Install the included 8-32NC bolts into the burner ports
3. Mix the Kastolite/Plibrico powder with water, a little at a time, until paste like. Use this mixture to build a bottom for the forge chamber.
4. Mix a splash of water with the Satanite and mix until wet, coat the entire inside of the forge. Allow to dry overnight.
48 in stock