“Our biggest, most advanced bladesmith forge yet!”
Want a better forge for bladesmithing, one that’s going to last longer, get hotter, and use less propane than forges on eBay and Amazon? Then this is for you. With a 5″ diameter x 13″ long chamber, the Graham has plenty of room for even the biggest kukri, and hot enough for big billets of damascus. With a blown burner now standard, you have complete control over your atmosphere.
The Graham forge uses Plicast LWI 24 cast refractory, cured and baked for 6 hours at 450°F. Ready to use right out of the box and it will last much longer than wool based forges.
Want to weld in your forge, but aren’t comfortable with fluxless welding yet? WE include a bag of Plibrico’s Hymoor 3000 KK. It is rock hard and virtually immune to flux. Mix with a little water and form a flux proof bottom.
We also improved the construction level of this forge. With 1/8″ thick stainless tubing, TIG welded end plates, and a tough, cast refractory shell, it’s built to last! Heck, we even managed to make the toolrest stronger.
And to top it all off, we want to help you get started forging so we partnered with Admiral Steel to include a sample piece of their 1075 steel. It’s ideal for forging a knife and takes a great edge.
3 in stock
Chamber measures 5″ diameter × 13″
4″ × 2″‘ rear opening
Max temp of 2300° F
390+ BTU per cubic inch
Hot enough to forge weld!
Welded leg plates with integrated toolrest holder
- Forge w/ adjustable sliding tool rest
- 20 PSI regulator w/hose connects to 20lb. propane tanks
- New Firestorm 100k BTU blown burner (12VDC powered)
- One bag Plibrico Hymoor 3000 KK for flux resistant floor(not required)
Traditional 100k venturi burner available upon request
|Dimensions||16 × 10 × 14 in|