Graham Forge – Prototype v3 Stainless
It’s back, our most sought after forge, the Graham. Capable of larger billets, tomahawks, large bowies, this is the natural progression of the Atlas mini.
That’s right, Stainless!!! Now built using semi-finished 304SS. Imagine leaving it outside to cool and it not rusting.
May includes a piece of 1075 steel from Admiral Steel (depending on availability)
Chamber measures 5″ diameter × 12.5″
3″ x 1″‘ rear opening
Max temp of 2200° F
400+BTU per cubic inch
Hot enough to forge weld!
Legs are adjustable for uneven surfaces (stumps, ground, etc.)
Includes forge, adjustable sliding tool rest
0-20 PSI regulator w/hose connects to 20lb. propane tanks
Graham stainless steel 100k BTU burner
Out of stock
“Hot enough to forge weld, small enough to still be portable!”
One of the only knifemaker specific forges available, it’s designed and built by knifemakers. All the improvements to the forge over the past 7 years have come from recommendations from knifemakers. All forges are hand made in Iowa, USA, so yours will vary slightly from the picture.
The Graham forge uses insulating firebrick. This brick is softer and very efficient, and is much safer for your lungs than wool.
The Graham Forge can use kerosene or brake cleaner as flux without damaging any bricks.
My personal preference is to weld fluxless. I’ve had great success due to the neutrality of the flame in the Atlas Mini.
Be aware that the bricks are very fragile and will crack due to expansion from heating, moisture, etc. This is normal and unavoidable. We have used thermal imaging to inspect the forges during use and have found that it does NOT affect the performance of the forge.
|Dimensions||16 × 12 × 16 in|