Introducing our new budget line of blacksmith forges.
Simple and affordable, these are inswool lined forges.
Designed to have the front and rear partially blocked by firebricks
We include 16 oz. of 3000° refractory to line the shell for longer life
We also include 12 oz. of Kaolite LI-30 to build a flux resistant bottom
5″ x 12″ open ended chamber
100k BTU burner
0-20 PSI regulator
16 oz. Kaolite LI30 flux-resistant mortar
12 oz. 3000° refractory mortar
Some assembly required.
1. Install the included leg bolts
2. Install the included 8-32NC bolts into the burner port
3. Mix a splash of water with the heavy mortar and coat the entire inside of the forge. Allow to dry overnight.
4. Mix the dry powder with water, a little at a time, until paste like. Use this Kaolite to build a bottom for the forge chamber.
Out of stock
|Dimensions||9 × 9 × 13 in|