Atlas custom burners
$25.00 – $85.00
Designed for 3-4″/5-8″ chamber forges (two brick, 8″ round tank)
30k burner produces 30k BTU @ 20 PSI, untested at 30 PSI
100k burner produces 100k BTU @ 20 PSI, 150k BTU @ 30 PSI
Stainless steel and brass construction
3/8″ flare 45° fitting
6″ burner tube length
.82″/1.06″ outside diameter
Pressure gauge(only available on 100k Burner) is 0-30 PSI
This burner will not function while clamped in a vise. A forge chamber is required for proper function.
0-20 PSI regulator includes 3/8″ flare 45° fitting
Make sure to clean out any spiderwebs inside the burner tube. Seriously, spiders love to build nests inside these!
Warranty: Materials and Construction, 1 Year. Not warranted against burn out due to improper mounting, lack of forge lining maintenance or flash back (burning in mixing tube due to improper operating parameters or installation).
Hose must be tightened to the burn with a wrench to at least 15 Ft/Lbs of torque, or it will leak and possibly burn where you don’t want it to!
We do not provide a flare with our burners. Our burners are not a hand held torch, they go into a stationary device where a flare is not needed (the refractory lining creating the flare/flame holder).
|Dimensions||9 × 6 × 3 in|
|What size burner do you need|
I just need a regulator, Medium Forge (100K BTU w/ gauge), Medium Forge (100k BTU), Small Forge (30k BTU)
20 PSI Adjustable Regulator, I don't want a regulator